KD-133 Stall Rake, Black

K&D's complete black KD-133 stall rake pairs short rigid tines with a back leveling ridge for stable cleanup.

The complete black KD-133 rake

This is K&D Equestrian's complete KD-133 Stall Rake in black, matched to distributor part KD133-808. It includes the long handle and rake head, so the selected unit is ready as a full tool rather than a replacement head. The head has short rigid tines and a rear leveling ridge. Those are the key features for choosing this model: the tines move bedding across a floor, and the ridge leaves a smoother surface after raking.

Work through bedding and shavings

Use the tines for floor-level work in a stall, where bedding and shavings need to be gathered or shifted after waste is picked out. A rake handles that follow-up pass; a picking fork handles lifting and sorting the soiled material. K&D lists its KD-115 Stall Fork in that separate picking role. Keeping both tools on hand makes the work order clear: remove soiled bedding first, then rake the remaining clean material back across the stall floor.

Finish with the leveling ridge

The rear ridge is useful after bedding has been moved. Run it across the surface to smooth the loose material and restore an even finish in the area just cleaned. That job differs from the tines, which pull and gather bedding. It can also help tidy a patch that has been disturbed around a stall entrance or along a wall. The ridge is part of the rake head, so the same tool can move material and finish the surface without changing attachments.

Check the full tool's clearance

K&D lists the assembled rake at 63 inches long, 18.5 inches wide and 3 inches high, with a 60-inch handle. Check those measurements against the stall entrance and storage location before choosing where to keep it. The handle can hang above a walkway if there is enough overhead clearance; the wide head needs space beside the bedding cart or other stall tools. This fit check matters most in compact tack rooms and narrow barn aisles.

Use the rake across larger cleanup areas

The KD-133 is also intended for barn aisles and arena edges. Its 18.5-inch head covers a broader strip than a small hand tool, which is useful when bedding or shavings have spread beyond the stall. Work along the edge of an arena or aisle in manageable passes, then use the ridge to even the surface where needed. The 60-inch handle provides reach across the working area while the head stays on the floor.

Product dimensions

Directions for use

Use for stall, bedding, shavings, aisle or arena-edge cleanup. The back ridge can be used to level bedding after raking.