Reach the far fence row without dragging hose through the wet spot. This long-range handgun throws spray 38 feet out and 27 feet up at 600 psi and 8 gpm, so you can reach the back of a fence line, the top of a young pine or the underside of a barn eave from where you stand.
The chemical-resistant body and aluminum barrel keep the gun manageable through a long pass. The easy-pull trigger has an integrated lock and an adjustable on/off stop, so your hand isn't clamped down for an hour. The pattern adjusts, and the no-drip shut-off keeps spray off your boots when you let off the trigger.
Highlights
- 38 ft horizontal and 27 ft vertical spray reach
- Rated at 600 psi and 8 gpm
- Chemical-resistant body with aluminum barrel
- Easy-pull trigger with integrated lock and adjustable stop
- Adjustable spray pattern and no-drip shut-off
- 1/2 in FNPT inlet
Why a long-range gun pays off
A short wand makes you walk every line twice. A long-range handgun covers ground from one spot, so you spend less time walking and more time spraying the places that need it. For fence lines, brush at the edge of a pasture, weeds along a barn wall or the high spots you can't reach from the ground, reach is the whole job.
It suits the farm with long fence rows, the rancher who spot-sprays brush and weeds, and the homeowner who needs to hit a high eave or a tall shrub without climbing. Set the trigger stop before you start, and the pattern stays the same across the whole line.
At a glance
| Body | Chemical-resistant |
|---|
| Barrel | Aluminum |
|---|
| Maximum pressure | 600 psi |
|---|
| Maximum flow | 8 gpm |
|---|
| Spray reach | 38 ft horizontal, 27 ft vertical |
|---|
| Inlet | 1/2 in FNPT |
|---|
| Trigger | Easy-pull with integrated lock and adjustable on/off stop |
|---|
| Shut-off | No-drip |
|---|
| Pattern | Adjustable |
|---|
How to use it
- Set the trigger stop before you start, so the spray stays consistent across the whole line.
- Thread a 1/2 in male pipe fitting from your hose into the gun's 1/2 in FNPT inlet, and check your pump's pressure and flow against the 600 psi and 8 gpm rating.
- Adjust the pattern from a tight stream for reach to a wider fan for broadcast work.
- Use the trigger lock while you walk between passes, and use the no-drip shut-off when you let off.
- Flush the gun with clean water after every chemical job, so residue doesn't dry out in the nozzle or shut-off.
Good to know
- Spray with the wind at your back where you can, and keep the spray off your own boots and clothing.
- Match the gun and hose to your pump so the gun runs inside its 600 psi rating.
- Pair it with 1/2 inch EPDM spray hose and fittings from the same aisle to finish the line.
Get the reach you need before the fence-line season starts.