Nothing matches that yet. Try a brand or an animal, or call us at (850) 537-1000.
TriggerJet spray gun with a 21 inch aluminum extension, an X18 ConeJet tip and a 1/4 inch hose barb. Built for backpack and canister sprayers.
$16.50
21 inIn stock at the store
Want to see it first? Stop in at the store, or call the counter with questions.
A longer reach means fewer steps into the spray zone. This TriggerJet gun comes with a 21 inch aluminum extension and an adjustable X18 ConeJet tip, so you can reach the low spots, fence corners and the back side of the feeder from a comfortable stance. The lightweight gun is made for backpack, canister and other low-pressure sprayers, and the 1/4 inch hose barb connects it to your hose.
Lock the trigger open for steady flow on long runs, and release it when you need to stop. A strainer inside the handle helps keep the tip from clogging, and the molded polypropylene body is built for chemical resistance. Keep pressure at or under 100 psi, the gun's rating.
| Gun | TriggerJet 50800-21-AL-300 |
|---|---|
| Extension | 21 inch aluminum |
| Inlet | 1/4 inch hose barb |
| Tip | 38720-PPB-X18 adjustable ConeJet, 30 degree offset |
| Maximum pressure | 100 psi |
| Body | Molded polypropylene |
| Overall length | 30.5 inches with extension |
| Flow at 40 psi | 0.28 gpm (setting A) to 0.92 gpm (setting B) |
Connect the 1/4 inch hose barb to your sprayer hose and pick the tip setting you need: setting A gives a hollow cone and setting B a solid stream. Check the tip for clogs before you start, and rinse the wand with clean water after each job.
The gun is built for low-pressure sprayers, so keep it on backpack or canister units rated for it and stay under the 100 psi limit.
Get the kit on the shelf before the busy spray season.
Order online or call ahead and we’ll have it ready for pickup at 5791 Hwy 4. Local delivery is available; ask if your place is on the route.
All hours Central Time. Call for holiday hours.
Ask Daisy