Wildgame Innovations 12V Edrenaline Solar Panel

An adjustable solar charging panel for compatible 12V Wildgame Innovations feeder power control units.

Solar charging for a 12V feeder system

The 12V Edrenaline panel is a charging accessory for Wildgame Innovations deer feeders. It clips to a compatible 12V power control unit and converts sunlight into charging power for the feeder battery. Use it when the feeder setup and battery are built around 12 volts. A 6V panel or control unit is a different electrical setup, so check the unit label before connecting anything. This panel is not a feeder motor or timer. It helps maintain battery charge, while the feeder’s own control unit handles scheduled operation.

Adjust the panel toward open sky

The bracket lets the panel angle toward the sun, which gives you room to choose a mounting position rather than leaving it flat against a feeder barrel. Place it where the face is exposed to daylight and is less likely to sit under a roof edge, branch or other obstruction. Check the angle again after seasonal changes or after moving the feeder. A shaded panel can receive less light than an exposed one, so the mounting location matters. The product uses a thin-film solar design beneath a clear polycarbonate front cover. Its aluminum bracket supports mounting and adjustment.

Keep the feeder connection tidy

The panel connects through piggyback-style battery terminals, and the wiring runs inside protective steel flex conduit. Route that lead so it does not snag on the feeder lid, hang where animals can pull it, or rub against a sharp edge. Secure the panel and bracket before connecting the clips. Follow the feeder and battery instructions for polarity and terminal order. If the feeder’s control unit is not labeled for 12V, stop and confirm compatibility instead of testing a connection by trial and error. A mismatch between voltage systems can prevent proper operation or damage equipment.

What this accessory does and does not provide

The panel supplies charging power for a compatible feeder system when it receives sunlight. Its thin-film cells sit beneath a clear polycarbonate cover, while a steel flex conduit protects the lead. The aluminum bracket and mounting hardware let you angle the panel toward open sky. Keep the face clear of debris and check the clips, cable and bracket during routine feeder service. After moving the feeder or changing the panel angle, confirm that the lead remains secured and clear of moving or sharp parts.

Product details

Wildgame Innovations WGI-WGISO0003, 12 V Edrenaline Solar Panel. Aluminum mounting bracket and hardware, polycarbonate front cover, thin-film solar cells, protective steel flex conduit and piggyback battery connectors. Compatible with 12 V power control units.

Directions for use

Attach the panel to a compatible 12V power control unit and adjust its angle toward open sky. Connect the piggyback battery terminals according to the feeder and battery instructions. Keep wiring secured and clear of moving or sharp parts.

Cautions

Use only with a compatible 12 V power control unit. Confirm voltage and polarity from the feeder and battery labels before connection.