55-Gallon 3-Point BoomBuster Kit

A BoomBuster attachment kit for a 55-gallon three-point sprayer, sold as the kit rather than as a complete sprayer.

A spray attachment for a 55-gallon three-point unit

Code 5278207 is a BoomBuster attachment kit for Ag Spray's 55-gallon three-point sprayer. It is the nozzle and mounting assembly, not the tank, pump, tractor or complete sprayer. The matching machine and pumping system need to be in place already. This code is tied to that 55-3PT unit, so compare the sprayer model and hitch before ordering instead of assuming the kit fits another frame with a similar tank size.

Know what arrives in the kit

The assembly pairs a BoomBuster bracket weldment with the sprayer's three-point bracket. Its XT024 subassembly carries the adjustable slide, handle screw, two micro valves and two XT024 tips. Half-inch elbows, barbed fittings, reducing bushings and hose clamps connect the plumbing; the included half-inch EPDM hose totals about 12 feet across the routed sections. The assembly uses eight flanged bolts and eight grade 8 flanged top-lock nuts. Nested XT024 parts belong to that assembly, not to a second nozzle unit.

Check the mounting and plumbing together

Before mounting the bracket, compare its attachment points with the 55-3PT frame and check the sprayer’s clearance. The adjustable slide and handle screw provide a positioning point for the XT024 assembly. Confirm that the planned location leaves the nozzle assembly aligned with the intended spray path and that the mounting hardware is ready before fastening it.

Plan nozzle position before tightening

The mounting brackets and slide occupy space behind the spray outlets. Check the three-point hitch through its working movement and make sure the bracket does not meet the tractor or sprayer frame. Leave access to the two micro valves so they can be reached after the kit is installed. Use the Ag Spray manual for the assembly sequence and the sprayer’s operating instructions for the machine settings.

Keep the kit identity with the machine

Keep the 5278207 code with the 55-3PT machine record. The numbered parts breakdown separates the XT024 nozzle assembly from fittings and brackets, which helps identify a replacement component without treating the kit as a complete sprayer. Check the hose and hardware during assembly, then retain the manual with the machine. For application settings, pressure and safe operation, use the sprayer instructions together with the label for the material being applied; the kit code alone does not specify those settings.

Kit components

Ag Spray 5278207 is the BoomBuster kit for the 55-gallon 3-point sprayer. The XT024 subassembly contains the nested components identified below; these are not extra top-level assemblies.

Directions for use

Use with a compatible 55-gallon three-point sprayer. Follow the sprayer and spray-material instructions for installation, operation, pressure and application rate.

The manual describes the included hose length as the approximate combined length of the hoses. See the Ag Spray 55-3PT manual for the assembly diagram and installation sequence.

Cautions

Use the application-material label and sprayer instructions for required protective equipment and safe handling. Do not infer a spray rate from the kit contents.