OKBRAND 5/16 in x 4 ft Smooth Painted Electric Fence Post

A 48-inch smooth painted steel electric-fence post with a rugged anchor plate.

A steel post for an electric fence line

This OKBRAND post is 48 inches long and 5/16 inch in diameter. It is made from high-strength steel, has a smooth round painted finish and a rugged anchor plate. The product weight is 1.125 pounds. Use those dimensions when matching the post to a fence layout, transport plan and the materials already on the property. The post is one support in a larger fence system. It does not include a charger, wire, insulators or connection hardware. Keep those parts in the same planning list so the fence can be assembled with compatible components rather than relying on a post alone.

Plan the fence around its job

Before placing posts, decide what the fence must do: divide a pasture, hold livestock away from a road, or make a temporary subdivision inside a larger field. The right layout depends on the animals, neighboring crops and vegetation. A line that works for cattle may not suit horses or sheep. Map property boundaries, field access and gates first, then trace the fence route. Straight runs are easier to lay out and generally use less fencing material than a route with unnecessary bends. Set the post quantity only after measuring that route and deciding how many charged strands the system needs.

Treat water, shade and gates as part of the layout

A pasture fence can change how animals move through a field. Consider water, shade and handling access while planning paddocks. A central water point may concentrate livestock and create muddy ground. Keep water access practical from each paddock to support livestock movement and grazing distribution. Place gates where animals and equipment can reach the next field without following a long detour along the fence. If shade sits on one side of a pasture, account for where animals are likely to gather before setting a permanent line. This post is a building component, so its usefulness depends on the fence plan around it.

Match the post to a complete electric-fence system

An electric fence needs a properly selected controller, compatible wire and insulators, sound connections and a return path through the ground. Dry soil can make a ground-return system less effective; a design with grounded strands may help in some conditions. Vegetation contacting an energized wire can drain the charge, so route and maintenance matter after the posts are installed. Follow the controller and fencing-system instructions for post placement, wire tension, grounding and clearances. Do not infer a post-spacing rule from the post's length or diameter. The farm plan, soil and fence type determine those details.

Product details

OKBRAND item 0253-4. Retail UPC 755567025002. Round smooth painted steel electric fence post with rugged anchor plate. Length: 48 in. Diameter: 5/16 in (0.3125 in). Product weight: 1.125 lb

Directions for use

Plan the fence route, livestock access, gates and pasture use before installing posts. Choose the electric-fence controller, wire, insulators, connections and grounding system for the full installation. Follow the controller and fence-system instructions for post placement, wire tension, grounding and clearances. Keep energized wires clear of vegetation and inspect the system after installation and during use. Use the selected controller and fence-system directions for site-specific spacing, electrical installation and clearances.

Cautions

Use an approved electric-fence controller and follow its safety instructions. Keep people and animals away from energized conductors during installation and maintenance.