Nothing matches that yet. Try a brand or an animal, or call us at (850) 537-1000.
A professional-use cypermethrin insecticide in four water-soluble 9.5 g packets for labeled pest-control work.
$8.75
In stock at the store
Want to see it first? Stop in at the store, or call the counter with questions.
A professional-use cypermethrin insecticide in four water-soluble 9.5 g packets for labeled pest-control work.
Cyper WSP contains 40% cypermethrin and is labeled for licensed or state-registered applicators. It is offered here as four water-soluble packets of 9.5 grams each, 38 grams in total. The retail unit is the four-packet package. Its uses include structural pest work across homes and commercial accounts, subject to the specific site directions. It is a professional product even when the pest problem occurs in a residence.
Each inner packet holds a measured amount of wettable powder concentrate. During the mixing process, its film dissolves in water and releases the powder into the spray mixture. The packet is therefore part of the preparation system, rather than a sachet that is cut open and sprinkled into a crack. Dry dust application is a different process. Keeping those formats distinct matters when choosing equipment and preparing for a service visit.
The powder is dispersed in the water for spray application. The label describes placing the packets in the spray tank and allowing them to dissolve with agitation. Water-soluble packaging does not make the concentrate a finished spray, nor does it remove the need to distribute the powder through the carrier. The number of packets and finished volume depend on the concentration specified for the target pest and treatment.
An indoor crack-and-crevice application targets insect shelter points rather than spraying every accessible surface. Exterior treatments address listed locations around structures where pests occur or enter. The label includes ants and cockroaches, with additional directions for pests such as fleas and ticks. These tasks differ in where the spray belongs. A product with several pest names still needs an application plan suited to the actual account.
The manufacturer describes contact and residual control, meaning the treatment can affect listed pests present during application and those that later encounter treated surfaces. It also describes the formulation as odorless and non-staining. Those features can be useful around finished structures, but do not turn every indoor surface into an application site. The four-packet format gives the professional a countable supply for label-defined batches without measuring loose powder from a bulk container.
Mixing Procedures Each foil envelope of Cyper WSP contains water-soluble packets of Cyper wettable powder. The foil envelope must be opened for use. Because water-soluble packets readily dissolve in the presence of moisture, do not allow them to get wet before adding to the applicator tank. Wear dry gloves when handling the water-soluble packets. Handle with care because excessive handling may cause rupture of the water-soluble packet. Unused water-soluble packets should be stored in the original foil envelope, folded over to minimize exposure to moisture. Cyper WSP must be diluted with water for applications using hand-held or power- operated application equipment. For best results dilution should be achieved using the following steps. 1. Fill applicator tank 1/2 with water. 2. Add desired Cyper WSP packet(s). 3. Allow 1-2 minutes for dissolution of water-soluble packet(s). 4. Close application equipment and agitate, stir or shake applicator tank. 5. Finish filling applicator tank and agitate again before use to ensure satisfactory suspension. Note: • Shake or re-agitate application equipment before use if application is interrupted. • Mix only amount of application volume required for each use. • Do not store dilution in application equipment overnight.
Read the complete product label for the site-specific directions, rates, application tables and restrictions.
Complete manufacturer product label (PDF): https://www.agrian.com/pdfs/Cyper_WSP_Label1b.pdf
For use by individuals/firms licensed or registered by the state to apply pesticide products. States may have more restrictive requirements regarding qualifications of persons using this product. Consult the pest control agency of your state prior to use of this product.
FIRST AID If in Eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. • Call a poison control center or doctor for treatment advice. If on Skin or Clothing: • Take off contaminated clothing. • Rinse skin with plenty of soap and water for 15-20 minutes. • Call a poison control center or doctor for treatment advice. If Swallowed: • Call a poison control center or doctor immediately for treatment advice. • Have a person sip a glass of water if able to swallow. • Do not induce vomiting unless told to do so by the poison control center or doctor. • Do not give anything by mouth to an unconscious person. If Inhaled: • Move person to fresh air. • If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. • Call a poison control center for further treatment advice. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For information on this product, contact the National Pesticide Information Center, 1-800-858-7378, Monday-Friday, 7:30 AM-3:30 PM PST. You may also contact the National Poison Control Center, 1-800-222-1222, day or night, for emergency medical treatment information [or SafetyCall® at (866) 897-8050]. FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident call CHEMTREC 1-800-424-9300. PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS WARNING/AVISO Causes substantial but temporary eye injury. Harmful if swallowed, inhaled or absorbed through the skin. Avoid contact with skin. Do not get in eyes or on clothing. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse. Personal Protective Equipment (PPE) Some materials that are chemical-resistant to this product are barrier laminate, nitrile rubber > 14 mils neoprene rubber > 14 mils and Viton® > 14 mils If you want more options follow the instructions for category E on an EPA chemical-resistance category selection chart Mixers, loaders, applicators, and other handlers must wear • Long-sleeved shirt and long pants, • Shoes plus socks • Chemical-resistant gloves for mixers loaders and applicators using handheld equipment See Engineering Controls for additional requirements. Follow manufacturer's instructions for cleaning/maintaining PPE If not such instructions for washables exist, use detergent and hot water Keep and wash PPE separately from other laundry Engineering Controls Mixers and loaders using water-soluble packets must: • Wear the personal protective equipment required in the PPE section of this labeling for mixers and loaders and • Be provided and must have immediately available for use in an emergency such as a broken package spill or equipment breakdown a NIOSH-approved respirator with a dust/mist filter with MSHA/NIOSH approval number prefix TC21C or any N, R, P, or HE filter. User Safety Recommendations • Users should wash hands before eating drinking, chewing gum, using tobacco or using the toilet • Users should remove clothing/PPE immediately if pesticide gets inside Then wash thoroughly and put on clean clothing • Users should remove PPE immediately after handling this product As soon as possible, wash thoroughly and change into clean clothing ENVIRONMENTAL HAZARDS This product is extremely toxic to fish and aquatic invertebrates. To protect the environment do not allow pesticide to enter or run off into storm drains drainage ditches, gutters, or surface waters Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area Rinsing application equipment over the treated area will help avoid runoff to water bodies or drainage systems This product is highly toxic to bees exposed to direct treatment on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds while bees are actively visiting the treatment area PHYSICAL AND CHEMICAL HAZARDS This product is a combustible powder and is incompatible with oxidizing agents. This product can ignite burn and form explosive mixtures with air if not handled correctly.
Order online or call ahead and we’ll have it ready for pickup at 5791 Hwy 4. Free delivery within 5 miles, and a flat $15 out to 20 miles.
All hours Central Time. Call for holiday hours.
Ask Daisy